Skip to main content
Submit a request Return to Main Website

Help Center

Popular Searches:

warranty shipping returns

3S-2016 - 3sixT Wall Charger ANZ 20W USB-C PD - White

Customer Support
  • Updated

Product details

  • Product Model: 3S-2016
  • Product Name: 3sixT Wall Charger ANZ 20W USB-C PD - White
  • Dimensions: 43 x 40 x 70mm
  • Colour: White

What's in the box

  • 1x 3sixT Wall Charger ANZ 20W USB-C PD - White
  • Warranty card

 

Supported devices

  • USB-C compatible devices
  • 3sixT MFI type IT/AV products

 

Technical specifications

  • Input: AC 100-240V,50/60Hz, 0.5A
  • Output: 5V/3A, 9V/2.22A
  • Short Circuit Protection: Yes
  • Over Current Protection: Yes
  • Over Voltage Protection: Yes
  • FOD Protection: Yes
  • Turn On Delay Time: <3 seconds
  • Working temperature: -25 - 75 ºC
  • ANZ electrically-certified
  • Type I plug for Australia and New Zealand

 

Operating instructions

  • PLUG IN / TURN ON

    1. Turn off the wall socket.

    2. Orientate the pins on the wall charger correctly to the orientation of the intended wall socket.

    3. Bring the wall charger slowly towards the wall socket, making sure to line up the pins correctly.

    4. Gently & slowly push in the wall charger via the main body, making sure it is fully connected and flush with the wall socket (do not push with excessive force).

    5. Plug in your compatible USB-C cable into the wall charger via the USB-C input & connect the other end connector into your desired & compatible device.

    6. Turn on the wall socket.

      Please note, the 3S-2016 - 3sixT Wall Charger ANZ 20W USB-C PD - White is for use with all 3sixT MFI type IT/AV products.

       

  • UNPLUG / TURN OFF

    1. Turn off the wall socket.

    2. Disconnect the USB-C cable from the USB-C input.

    3. Grip the wall charger around the main body with your fingers or in the palm of your hand.

    4. Gently and slowly pull the wall charger away from the wall socket, making sure that the action is in a straight line (to ensure pins are not bent during the unplugging process).

    5. Double check wall socket is turned off.

  •  

Safety warnings

Please read all instructions and warnings before using this product. Improper use of this product may result in product damage, excessive heat, emission of toxic fumes, and the risk of fire or explosion, for which damages you ("the Customer") and not 3sixT ("the Manufacturer") are responsible.

 

WARNINGS

  • Avoid storing the accessory in high-temperature environments, including exposure to intense sunlight or other heat sources like heaters or stovetops.
  • Refrain from placing the device in fire or any extremely hot setting.
  • Under no circumstances should you attempt to disassemble or modify the accessory.
  • Ensure to power the device only as explicitly instructed in the user guide, using the specified method.
  • This accessory is intended solely for use by adults and not by minors. Please be aware that this device may include small parts, plastic elements, and components with sharp edges that could potentially cause injury or pose a choking hazard. The customer takes full responsibility for ensuring compliance, and any misuse or unintended use by a minor shall indemnify the manufacturer from liability.
  • All 3sixT products undergo a thorough quality inspection during manufacture. However, if you notice excessive heat, deformation, or smoke emitting from the device immediately stop using this product and contact 3sixT.

 

CONTACT US
Customer Support Team
E: support@3sixtgear.com
T: Monday - Friday 9am-5pm AEST

 

 

Warranty information

3SIXT 3-YEAR STANDARD MANUFACTURER WARRANTY

3sixT will replace the faulty product at no cost to the consumer. The warranty does not extend to any consequential damages or costs that may be incurred and is valid for 3 YEARS from the date of purchase.

The consumer must return the faulty product to the retail store it was purchased from together with proof of purchase. The benefits to the consumer under this warranty are in addition to other rights and remedies of the consumer under Australian and New Zealand laws in relation to the goods to which the warranty relates.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

 

The warranty is provided by:
Cellnet Group Limited (ACN: 010 721 749) trading as 3sixT Gear

  • AU: E1, 5 Grevillea Place, Brisbane Airport, QLD 4008
  • NZ: 10a Orbit Drive, Rosedale, Auckland 0632

 

Related warranties

  • 3-Year Standard Manufacturer Warranty OR
  • 3sixT 5-Year Extended Manufacturer Warranty with registration here

Submit a request